Width: 1300 mm Length: 3000 mm Number of Cylinders: 6 units Pressing force: 80 tons Opening size: 400 mm Plate Type: Aluminum Heating System: Oil System Pressing Plates: Wide plates located in the middle allow for compression of the material (e.g., bonding veneer onto wood panels) under high pressure and heat. Hydraulic Pistons: Black cylinders seen at the bottom apply strong upward pressure, ensuring the material is pressed uniformly. Heating System: Press plates are typically heated by oil or electricity, which helps the glue cure faster and improves the quality of the process. Control Panel: Buttons and indicators (including a pressure gauge) located in the top right corner are for managing pressure settings, temperature control, and pressing time. Safety Cage: The orange metal cage on the left protects the operator from moving parts during operation. Hydraulic Unit: The motor and tank system in the bottom right corner generates the hydraulic power required for the machine to operate. These types of machines are standard equipment in the industry, especially for bonding laminate or natural veneer onto particleboard and MDF.